| http://dbpedia.org/ontology/abstract
|
車輛安全完整性等級（Automotive Safety Integrity Leve … 車輛安全完整性等級（Automotive Safety Integrity Level）簡稱ASIL，是由ISO 26262《道路車輛功能安全》定義的風險分類架構。是IEC 61508所定義的安全完整性等級（SIL）在車輛產業的應用。此分類有助於定義在符合ISO 26262標準時，需要的安全性要求。ASIL是針對各危害，考慮在車輛運作時的嚴重性、暴露程度以及可控制性，進行風險分析後而建立。對於這項危害的安全性目的也就會變成ASIL的要求。 ISO 26262中有定義四種不同的ASIL：ASIL A、ASIL B、ASIL C及ASIL D。其中ASIL D是產品最高的安全完整性，而ASIL A是最低的安全完整性。若是識別為QM的風險，不需要有對應的安全需求。性，而ASIL A是最低的安全完整性。若是識別為QM的風險，不需要有對應的安全需求。
, Automotive Safety Integrity Level (o també … Automotive Safety Integrity Level (o també ASIL, en anglès nivell d'integritat de seguretat automotriu) és un índex de classificació de risc definit per l'estàndard ISO 26262 (Seguretat funcional per a vehicles de carretera). ASIL és una adaptació de l'índex SIL de la norma IEC 61508 per a la indústria de l'automòbil.C 61508 per a la indústria de l'automòbil.
, Automotive Safety Integrity Level (ASIL) i … Automotive Safety Integrity Level (ASIL) is a risk classification scheme defined by the ISO 26262 - Functional Safety for Road Vehicles standard. This is an adaptation of the Safety Integrity Level (SIL) used in IEC 61508 for the automotive industry. This classification helps defining the safety requirements necessary to be in line with the ISO 26262 standard. The ASIL is established by performing a risk analysis of a potential hazard by looking at the Severity, Exposure and Controllability of the vehicle operating scenario. The safety goal for that hazard in turn carries the ASIL requirements. There are four ASILs identified by the standard: ASIL A, ASIL B, ASIL C, ASIL D. ASIL D dictates the highest integrity requirements on the product and ASIL A the lowest. Hazards that are identified as QM (see ) do not dictate any safety requirements. ) do not dictate any safety requirements.
|
| http://dbpedia.org/ontology/wikiPageExternalLink
|
http://www.sae.org/works/documentHome.do%3FdocID=J2980&inputPage=wIpSdOcDeTaIlS&comtID=TEVEFS +
|
| http://dbpedia.org/ontology/wikiPageID
|
41401565
|
| http://dbpedia.org/ontology/wikiPageLength
|
15065
|
| http://dbpedia.org/ontology/wikiPageRevisionID
|
1115751779
|
| http://dbpedia.org/ontology/wikiPageWikiLink
|
http://dbpedia.org/resource/ISO_13849 +
, http://dbpedia.org/resource/Category:Automotive_engineering +
, http://dbpedia.org/resource/IEC_60730 +
, http://dbpedia.org/resource/Safety_Integrity_Level +
, http://dbpedia.org/resource/DO-254 +
, http://dbpedia.org/resource/IEC_62304 +
, http://dbpedia.org/resource/European_Cooperation_for_Space_Standardization +
, http://dbpedia.org/resource/Category:Automotive_safety +
, http://dbpedia.org/resource/Hazard +
, http://dbpedia.org/resource/Category:Safety_engineering +
, http://dbpedia.org/resource/DO-178C +
, http://dbpedia.org/resource/ARP4754 +
, http://dbpedia.org/resource/IEC_61508 +
, http://dbpedia.org/resource/European_Committee_for_Electrotechnical_Standardization +
, http://dbpedia.org/resource/ARP4761 +
, http://dbpedia.org/resource/ISO_26262 +
|
| http://dbpedia.org/property/wikiPageUsesTemplate
|
http://dbpedia.org/resource/Template:Reflist +
, http://dbpedia.org/resource/Template:Citation_needed +
, http://dbpedia.org/resource/Template:See_below +
, http://dbpedia.org/resource/Template:Highlight +
|
| http://purl.org/dc/terms/subject
|
http://dbpedia.org/resource/Category:Automotive_engineering +
, http://dbpedia.org/resource/Category:Automotive_safety +
, http://dbpedia.org/resource/Category:Safety_engineering +
|
| http://purl.org/linguistics/gold/hypernym
|
http://dbpedia.org/resource/Discussion +
|
| http://www.w3.org/ns/prov#wasDerivedFrom
|
http://en.wikipedia.org/wiki/Automotive_Safety_Integrity_Level?oldid=1115751779&ns=0 +
|
| http://xmlns.com/foaf/0.1/isPrimaryTopicOf
|
http://en.wikipedia.org/wiki/Automotive_Safety_Integrity_Level +
|
| owl:sameAs |
http://gl.dbpedia.org/resource/Automotive_Safety_Integrity_Level +
, http://ca.dbpedia.org/resource/Automotive_Safety_Integrity_Level +
, http://dbpedia.org/resource/Automotive_Safety_Integrity_Level +
, https://global.dbpedia.org/id/f8Ho +
, http://www.wikidata.org/entity/Q17004900 +
, http://zh.dbpedia.org/resource/%E8%BB%8A%E8%BC%9B%E5%AE%89%E5%85%A8%E5%AE%8C%E6%95%B4%E6%80%A7%E7%AD%89%E7%B4%9A +
, http://rdf.freebase.com/ns/m.0zrpxcj +
|
| rdf:type |
http://dbpedia.org/ontology/Work +
|
| rdfs:comment |
Automotive Safety Integrity Level (ASIL) i … Automotive Safety Integrity Level (ASIL) is a risk classification scheme defined by the ISO 26262 - Functional Safety for Road Vehicles standard. This is an adaptation of the Safety Integrity Level (SIL) used in IEC 61508 for the automotive industry. This classification helps defining the safety requirements necessary to be in line with the ISO 26262 standard. The ASIL is established by performing a risk analysis of a potential hazard by looking at the Severity, Exposure and Controllability of the vehicle operating scenario. The safety goal for that hazard in turn carries the ASIL requirements.ard in turn carries the ASIL requirements.
, Automotive Safety Integrity Level (o també … Automotive Safety Integrity Level (o també ASIL, en anglès nivell d'integritat de seguretat automotriu) és un índex de classificació de risc definit per l'estàndard ISO 26262 (Seguretat funcional per a vehicles de carretera). ASIL és una adaptació de l'índex SIL de la norma IEC 61508 per a la indústria de l'automòbil.C 61508 per a la indústria de l'automòbil.
, 車輛安全完整性等級（Automotive Safety Integrity Leve … 車輛安全完整性等級（Automotive Safety Integrity Level）簡稱ASIL，是由ISO 26262《道路車輛功能安全》定義的風險分類架構。是IEC 61508所定義的安全完整性等級（SIL）在車輛產業的應用。此分類有助於定義在符合ISO 26262標準時，需要的安全性要求。ASIL是針對各危害，考慮在車輛運作時的嚴重性、暴露程度以及可控制性，進行風險分析後而建立。對於這項危害的安全性目的也就會變成ASIL的要求。 ISO 26262中有定義四種不同的ASIL：ASIL A、ASIL B、ASIL C及ASIL D。其中ASIL D是產品最高的安全完整性，而ASIL A是最低的安全完整性。若是識別為QM的風險，不需要有對應的安全需求。性，而ASIL A是最低的安全完整性。若是識別為QM的風險，不需要有對應的安全需求。
|
| rdfs:label |
Automotive Safety Integrity Level
, 車輛安全完整性等級
|
